Water Conservation in the Yard and Garden

  1. Plant drought-resistant lawns, shrubs and plants
    If you are planting a new lawn, or overseeding an existing lawn, use drought-resistant grasses such as the new "Eco-Lawn".

    Many beautiful shrubs and plants thrive with far less watering than other species. Replace herbaceous perennial borders with native plants. Native plants will use less water and be more resistant to local plant diseases. Consider applying the principles of xeriscape for a low-maintenance, drought-resistant yard.

    Plant slopes with plants that will retain water and help reduce runoff.

    Group plants according to their watering needs.
     

  2. Put a layer of mulch around trees and plants
    Mulch will slow evaporation of moisture while discouraging weed growth. Adding 2 - 4 inches of organic material such as compost or bark mulch will increase the ability of the soil to retain moisture. Press the mulch down around the drip line of each plant to form a slight depression which will prevent or minimize water runoff.
     
  3. Don't water the gutter
    Position your sprinklers so water lands on the lawn or garden, not on paved areas. Also, avoid watering on windy days.
     
  4. Water your lawn only when it needs it
    A good way to see if your lawn needs watering is to step on the grass. If it springs back up when you move, it doesn't need water. If it stays flat, the lawn is ready for watering. Letting the grass grow taller (to 3") will also promote water retention in the soil.

    Most lawns only need about 1" of water each week. During dry spells, you can stop watering altogether and the lawn will go brown and dormant. Once cooler weather arrives, the morning dew and rainfall will bring the lawn back to its usual vigor. This may result in a brown summer lawn, but it saves a lot of water.
     

  5. Deep-soak your lawn
    When watering the lawn, do it long enough for the moisture to soak down to the roots where it will do the most good. A light sprinkling can evaporate quickly and tends to encourage shallow root systems. Put an empty tuna can on your lawn - when it's full, you've watered about the right amount. Visit our natural lawn care page for more information.
     
  6. Water during the early parts of the day; avoid watering when it's windy
    Early morning is generally better than dusk since it helps prevent the growth of fungus. Early watering, and late watering, also reduce water loss to evaporation. Watering early in the day is also the best defense against slugs and other garden pests. Try not to water when it's windy - wind can blow sprinklers off target and speed evaporation.
     
  7. Add organic matter and use efficient watering systems for shrubs, flower beds and lawns
    Adding organic material to your soil will help increase its absorption and water retention. Areas that are already planted can be 'top dressed' with compost or organic matter.

    ​Avoid over-watering plants and shrubs, as this can actually diminish plant health and cause yellowing of the leaves.

    ​When hand watering, use a variable spray nozzle for targeted watering.

    You can greatly reduce the amount of water used for shrubs, beds and lawns by:

    • the strategic placement of soaker hoses
    • installing a rain barrel water catchment system
    • installing a simple drip-irrigation system
  8. Don't run the hose while washing your car
    Clean the car using a pail of soapy water. Use the hose only for rinsing - this simple practice can save as much as 150 gallons when washing a car. Use a spray nozzle when rinsing for more efficient use of water. Better yet, use a waterless car washing system; there are several brands, such as EcoTouch, which are now on the market.
     
  9. Use a broom, not a hose, to clean driveways and sidewalks
     
  10. Check for leaks in pipes, hoses, faucets and couplings
    Leaks outside the house may not seem as bad since they're not as visible. But they can be just as wasteful as leaks indoors. Check frequently to keep them drip-free. Use hose washers at spigots and hose connections to eliminate leaks.